Accounts 

Launching an application under xp how to do. Windows Secrets for Beginners. How to run old games in Windows XP and Windows Vista. How to install and download old games

We all remember the good old games that we played at the dawn of the development of high computer technology and which are sometimes so lacking today. Raster and developing graphics, gameplay, software capabilities of the gaming industry, but sometimes you want to take a break from all this abundance and play something old and native. This is where the catch awaits us - old games do not run on new operating systems, they work too fast, or they don’t want to install at all. What to do if you want to play, but the game does not start. This article will help you solve this problem and tell you how to run older games or slow them down.

How to install and download old games

So, let's look at acceptable options for "revitalizing" old games, which, due to the invincible nastolgia, we wanted to play. Older games can be roughly divided into two categories: games for the DOS platform and more modern games for the Windows 95/98 platform. The first type, DOS games, were created for a completely different type of operating system, so they will flatly refuse to run under Windows XP and, even more so, under Windows Vista. However, there is always a way and we will tell you how to run the old DOS game on the Windows XP/Vista platform.

How to Run Old DOS Games on Windows XP/Vista

Download DOSbox emulator - DOS emulator for XP, DOS emulator for Vista
Download GUI for DOSbox - DOG

So that lovers of good old toys do not get bored in the latest operating systems among the abundance of functions and useless features, many DOS emulators have been developed. A DOS emulator is a program that mimics the functions of the DOS operating system, allowing you to run old games on Windows XP and Windows Vista. Learning to work with the program does not require special skills and knowledge, so you can install, configure and run your favorite rare game as quickly as possible. One of the most common DOS emulators is DOSbox (dosbox.sourcefprge.net). The main problem for novice users may be ignorance of the DOS operating system, namely its text interface, however, in this case there is a ready-made solution. To simplify the process of working in the emulator, a special graphical shell was developed, that is, an intuitive interface - DOG. For installation DOG, you need to install dosbox, then run the setup file and tell the installer the path to your DOSbox emulator. Now you can easily run old DOS games on Windows XP and Windows Vista using the Dosbox emulator, equipped with a user-friendly DOG GUI. Copy the desired game to your hard drive and run the emulator. Find the control panel, and on it the button Profiles - New Profile and enter the name of the game in the field profile name. Next click Select after the filename with EXE. Click OK and launch the game by double clicking on it.

Download DOSbox emulator and DOG GUI You can from our website using the appropriate links.

Some of the old DOS games that were loved by the public at one time have been reincarnated for new operating systems, thanks to enthusiasts and fans. Try to find a "ported" version of the old game on the Internet, perhaps someone has already created a version for Windows XP or Windows Vista.

How to Run Old Windows 95/98 Games on Windows XP/Vista

With games made for newer Windows 95/98 operating systems, but those. which still do not want to run under Windows XP or Vista, Microsoft developers have provided a very useful feature. In Windows XP / Vista operating systems, there is a special utility that allows you to run old programs and games in compatibility mode with the new OS. In order to enable compatibility mode, you need to find the downloadable game file and go to its properties (right-click on the file - properties). Go to tab Compatibility and check the box next to Run the program in compatibility mode for... Select operating system Windows 95(or another, depending on which OS the application was developed for) and the apply button. Now run the old game and enjoy!

Developers of old games often resort to developing patches for new types of operating systems. Patch(in this case) is an add-on program that allows you to run the old game on Windows Xp or Vista. Install the game, download its patch and install it to the desired directory. if the developers have tried their best, you can fully enjoy the game.

So, for example, the developers of the domestic game did S.T.A.L.K.E.R. developed for the Windows XP operating system. The game refused to run or worked incorrectly on the newer Windows Vista OS, after which the development company released a patch for the game on the newer operating system.

Decreased speed in older games

Download CPUkiller

Another problem for older games for newer PCs can be the speed of the gameplay. After all, the gigahertz of modern processors is growing every day, thereby forcing some old games to work much faster than they should. You will understand what we are talking about when faced with this. If your game is running too fast, like it's in overdrive, you'll need a program that will force your CPU to slow down. One of the most popular programs of this kind is CPU Killer. It is very easy to use and compact. Download CPU Killer- a program that reduces the frequency of the processor, you can from our website.

Instruction manual for CPUKiller

First of all, you need to download CPU Killer and install it. Installing CPU Killer is quite simple and is no different from installing regular programs - you will be greeted by the installation wizard and prompted to specify the installation folder. Follow the prompts of the wizard and run the program.

Novice PC users are not recommended to change the settings of the program, so let's go straight to using it. On the screen of the program, you see a graph of the processor, as well as a scale with a slider below. To reduce the frequency of the processor, you should move the slider to the desired percentage to the right and click Start. After that, the forced reduction of the processor frequency by the program will immediately take place. CPU Killer. Roll up the window and play! To turn off just press stop.

As you can see, the program can be used safely and without fear, as well as turned on or off at any convenient time and for the desired period.

We hope you will have no problems running old games on Windows XP or Windows Vista and have a great time playing old games. Commandos or UFO.

Description of how to install and run the full version Windows XP from under Windows Vista or Windows 7 using the program Oracle Virtual Box. In this case, Windows XP is installed in a virtual machine and runs as a standalone application on Windows Vista, Windows 7, or any other operating system, including various Linux distributions. In this way, compatibility problems of various programs and drivers with Windows Vista, Windows 7, or other operating systems can be resolved.

A small introduction

Probably, many of you, my dear readers, have already managed to install and try Windows Vista and Windows 7. It seems that the systems are good for everyone, but some programs and old games do not run in the new operating system, and drivers for some devices do not work. What to do in this case? Refuse the delights of the new version of Windows?

In fact, there are several ways to solve this problem. The most obvious is to install Windows XP as a second system with the ability to choose which one to include at boot. This method is described in this article:. But here comes the inconvenience. For the sake of some kind of program, you need to restart the laptop, turn on Windows XP, work with the program, restart the laptop and turn on Windows 7, For example. Inconvenient, right? But what if your favorite USB modem only works fine in Windows XP? Reboot the system and turn on Windows XP in order to surf the Internet?

Fortunately, there is a solution. Windows XP can be installed on a virtual machine and run from under any operating system as a separate program. It works according to this principle Microsoft Windows 7 XP Mode. It's a good technology, but for it to work, virtualization support is required on the laptop, and it only works in Windows 7 Professional, Windows 7 Ultimate and Windows 7 Enterprise. But what if the laptop is running Windows Vista?

And this is where a great program comes in. virtual box from Sun. It is completely free, allows you to create virtual machines on a laptop, on which you can install many operating systems. The advantage of this utility compared to Microsoft Windows 7 XP Mode is support for 3D graphics for virtual machines, it does not need hardware virtualization, as well as the fact that it can be run on any version of Windows, Linux, etc.. The downside is that you formally need a licensed Windows XP, although taking into account our realities ... :)

This article will walk you through the process of installing Windows XP in a virtual machine. The whole process can be broken down into the following steps:

If you have any problems or questions about working with the Virtual Box virtual machine, then you should ask for help in this forum thread:.

1. Create a virtual machine

First of all, you need to install the utility virtual box( / ). During installation, it is important to note the following options:


System devices will also be installed. The corresponding installation requests must be allowed.

When the installation is completed, run the utility and click on the button Create:


Should run:




Let's move on to the next window. Since we do not have a virtual hard disk, we need to create a new one:



Select the type of virtual hard disk. I recommend :





That's all. The virtual machine has been created. Now you can move on to setting it up.

2. Setting up the virtual machine

Before setting up, prepare a disk with Windows XP or an iso image with it, and then select the created virtual machine in the VirtualBox window and click on the button Properties:


Let's start with the tab Main. Optionally, you can arrange the menu of the virtual machine on top. So more convenient:


Go to tab System:


Here you can change the amount of RAM that is allocated to the virtual machine, change the boot order of virtual devices, enable or disable the IO-APIC option (required if you plan to use multiple processor cores for the virtual machine), and enable or disable EFI (required for some operating systems, e.g. macOS). Go to tab CPU:


Here you can specify how many processor cores the virtual machine can use, as well as enable or disable PAE / NX (some operating systems support PAE. This mode allows a 32-bit virtual system to use up to 64 GB of RAM). Go to tab Acceleration:


On this tab, you can enable or disable hardware virtualization. If you are going to install a 64-bit operating system, then you need to enable it, and you also need virtualization support from the laptop. If your laptop does not support this feature, then it does not matter. To run 32-bit operating systems on a virtual machine hardware virtualization is not needed.


VirtualBox supports 2D and 3D acceleration (OpenGL / DirectX8 / DirectX9). It should be included. Go to tab Net:


When installing VirtualBox, another network card appeared in the system, which is virtually connected to the network card of our virtual machine. We configure the virtual network adapter as shown in the figure above and go to the tab USB:


At the beginning of the article, it was said that using virtualization, you can get around the problem of incompatible drivers for USB devices with new operating systems. So here virtual box allows you to redirect so that any USB device that connects to your computer or laptop is connected not to the main operating system, but to the system that is running in the virtual machine. Then, on Windows XP, drivers are installed on a virtual machine for a new USB device and it fully works under Windows XP. The main system is the device will not see. Since there are a lot of USB devices in the system, so that when the virtual machine is turned on, all of them are not disconnected from the main one and are not connected to the virtual one, a system of filters was invented. The filters specify which USB devices should be disconnected from the main operating system and connected to Windows XP virtual when it is turned on.

To add a new filter, click on the plus icon and select the required USB device from the list. After that it appears in the list. Let's go to the tab:


Since there is no sense from Windows XP on a virtual machine without the ability to work with files on the main one, you need to share certain folders on the hard drive. To do this, click on the plus icon and select the folder on the hard drive of your computer or laptop that will run Windows XP on the virtual machine:

Enter its name and click OK. Here she is on the list:


Now there is still the last very small touch. You need to somehow install Windows XP :) Go to the tab carriers:


We have two options: install Windows XP from an .iso image or from a regular disk. In the first case, click on the icon with an arrow and click on the button Add:


Specify where the image with Windows XP is located and add it to the list:


We click on the image with Windows XP and click on the button Choose.

If you just have a disk with Windows XP, then put it in the drive and select your drive from the list:


Clicking OK. Now you can proceed with the installation Windows XP.

3. Installing and configuring Windows


A normal Windows XP installation should start:



I will not describe it in detail. The installation is described in detail in this material:. Drivers are not needed in this case. Everything you need is already included in Windows XP.

After installation, we will get a working Windows XP in a virtual machine. Now you need to install Guest OS add-ons. To do this, select the appropriate menu item Devices:


Important note: since the keyboard and mouse in a laptop or computer are often the same, the main operating system and the operating system that is running in the virtual machine are forced to share it somehow. For this, a capture mechanism is used. In other words, if a virtual machine is in the foreground, then everything that is entered from the keyboard will be addressed to it. You can also switch manually. For this, the default is right ctrl. When the virtual machine is working with the keyboard and mouse, the green arrow is lit in the lower right corner of the window with the virtual machine.

The installation of guest additions should begin:


Possible questions: if the installation has not started for you, then manually add the image VBoxGuestAdditions.iso in the folder with VirtualBox in the virtual drive as it was done when installing Windows XP, and then run the drive in the virtual machine.



Put a check next to Direct3D Support:


During installation, you will see several warnings like this:


Click Continue anyway. After installation, it is advisable to restart the virtual machine:


To maximize the virtual machine window, in the menu Car select item:


Now the frame has been removed and it has become much more convenient to work:


Now it remains to deal with shared folders. IN Windows XP launch command line:


We connect the previously created shared folder as a network drive. To do this, enter the command net use x:\\vboxsvr\Documents(Documents here is the name of the shared folder):


IN my computer disk appeared x:\, which we just connected:


The content of this drive matches the content of the shared folder we created earlier.

That's all.

If you have any questions about working with the VirtualBox utility, then we state them in this forum topic:. All questions that are related to the installation of Windows XP, please state in this forum thread:

Detailed Installation Guide Windows XP from a flash drive or memory card to any laptop, netbook or computer.

  • What to do with a blue screen or BSOD

    Detailed description of how to solve the problem with the blue screen of death or BSOD for newbies.

  • Cleaning Windows from viruses

    A guide on how to find and remove all viruses and other malware from a laptop or computer.

  • Installing Windows 7 from a flash drive

    Full and detailed description of several installation methods Windows Vista or Windows 7 from a flash drive or memory card to any laptop, netbook or computer.

  • Installing Windows Vista

    A detailed guide on how to install Windows Vista on a laptop or computer.

    • Old games on Windows 7. Moving to Windows 7 brings a lot of new features, but also a lot of problems. The first problem that a novice user faces is setting up the program.

    For those who have previously worked with Windows XP, it is much harder to adapt to the new interface and settings than for those who immediately start working on a new system. But some time passes and those who used to work in the old system understand that everything is not so bad as it seemed at first. Even many older games run fine on Windows 7. For example, my favorite toy Lara Croft (Tomb Raider 1), which was installed in DOS, works well. You just need to know how to do it. There is nothing difficult in this. Just turn on compatibility mode.

    How to run old games onWindows 7

    I'm sure that many of you still have old games that evoke nostalgia for those times when there was no such possibility as playing online. But what were those times...

    I myself used to play all night long, despite the fact that in the morning I had to go to work.

    My favorite games were, and are: Immortality, Tomb Raider (from the first to the fifth versions), Alice Through the Looking-Glass, The Seventh Guest, Gift, and many other equally interesting ones.

    I still cherish over 200 game discs. And even now I sometimes do not deny myself the pleasure of playing. But if I sit down, then it's better not to touch me.

    After such retreats from everyday life, I feel much better both mentally and physically.

    In vain, many parents think that games are just games. Thanks to games, my daughter learned almost everything on the computer, and became a programmer.

    Previously, just installing a toy sometimes required skills at the programmer level. This was especially true for games written under DOS. It now clicked on the installation file, or a button, and everything was installed and started automatically.

    And I remember how we installed the game Seventh guest in Windows 98. That's where the puzzle was. Everything is in English, a lot of files and nothing is clear what is happening. Then Windows XP came along, and some games just wouldn't install. Then we learned to put two systems in parallel. One for the old games, Millennium, and one for the new Piggy.

    For a long time we did not want to switch to the new Vista and Windows 7 systems, but now you can’t install XP on a new computer, since it has been discontinued and there are no drivers for new equipment for it, but you want to play old games.

    Now the seven has improved, and it has become possible to run old games and programs. We will now talk about how to do this.

    How to run old games onWindows 7?

    To do this, we need to enable Windows 7 Compatibility Mode.

    Right-click on the shortcut of the program or game and select the entry from the drop-down list - Properties .

    • In the window that opens, go to the tab Compatibility .

    • Check the box next to the entry Run the program in compatibility mode for:
    • Below, in the drop-down list, select the version of Windows with which your program or game used to work normally;
    • Below in Parameters you can set up:
    1. Use 256 colors . This mode is suitable for very old programs or games that have been running under DOS or Windows 98.
    2. Use a screen resolution of 640 x 480 . Also used for very early versions of operating systems.
    3. Disable visual design . Use this mode if you experience problems with menus or icons in windows.
    4. Disable desktop composition . This is a mode for turning off transparency and a number of visual effects. Turn it on only if there are problems with displaying the interface of games or programs.
    5. Disable image scaling at high screen resolution . This mode is used for problems with disproportionate window sizes or incorrect display of fonts in the program.

    Rights Level used only if you want the program to run only with administrator rights. In order for the settings to take effect for all users of this computer, click the button Change settings for all users .

    After all changes, click the button Apply And OK .

    This turns on compatibility mode in Windows 7 , and old games and programs are launched.

    If you want to have all the settings of Windows 7 at your fingertips, then read:

    Video How to run old games on windows 7.

    Many of us remember the good old games that we played at the dawn of computer technology, and which we often think about today.

    Technologies are growing and developing, the graphics are becoming more realistic, and the gameplay is getting more and more "fancy", but sometimes you want to play something old and painfully familiar, from those times when the gaming industry has not yet got on the conveyor belt and has not begun to churn out dozens of games and hundreds of thousands. When each toy was an event, and each had its own "zest". Many of these games have become true masterpieces, the popularity of which cannot be reached by modern projects, even sometimes very, very good ones, soundly and of high quality.

    And it doesn't matter what caused it - either ordinary nostalgia, or you yourself are still quite young and just want to try what your parents "cut" into during their computer youth. Or maybe you are a fan of some game series, for example, a space simulator x3, and were surprised to find that the universe " X", it turns out, did not begin with the advent of the very first X, and much earlier - with the appearance of the legendary ELITE, which was born back in the 80s of the last century and since then has undergone several dozen reincarnations in various sequels and clones for a variety of operating systems, and a relatively new x3 only continues the tradition of gaming legend. There are quite a few such series in the world of games - this is SETTLERS, And C&C with his first red alert"oh, and a series about Combat Robots, famous Civilization Sid Meier, and the legendary DOOM, which is almost the progenitor of all modern shooters. A real fan will definitely decide to go all the way, starting with the very first, still DOS game, that's why he is a fan.

    However, it does not matter what was the initial impetus, but you got it, downloaded it from the Internet (fortunately, there are enough such resources now) or brought an old toy on a disk, anticipating a pleasant evening. And this is where the disappointments begin. The game either does not want to install at all, or it installs, but does not start or does not work correctly, or it works so fast that it is not possible to somehow curb this process. The process of incomplete compatibility of old programs with Windows XP and Vista appears before us "in all its glory". But you should not despair - all these problems have long been solved by other users, and we can only talk about the methods for solving them, and you should carefully read and try.

    So let's start by dividing the old games conditionally into two categories: games for the DOS platform and slightly more modern ones for the Windows 95/98 platform. The first type, games for DOS, were created for a completely different type of operating system, so they will flatly refuse to run under Windows XP and, even more so, under Windows Vista. However, there is also a way out.

    Running Legacy DOS Games on Windows XP and Windows Vista

    Among the abundance of necessary functions and a whole bunch of useless features of modern operating systems, the function we need to launch DOS applications in Windows XP and Windows Vista is completely absent. But here third-party developers come to the rescue, who have created many DOS emulators specifically for this purpose - programs that imitate the functions of the DOS operating system and allow you to run old DOS applications in modern OSes. One of the most popular and widespread emulators has become DOSbox(dosbox.sourceforge.net). The program is quite simple and does not require much effort to master, but here the main problem for beginners may be the lack of skills in working in DOS and ignorance of its text interface. Especially for such users, several graphical shells have been developed that offer convenient intuitive control. One of these shells DOG We invite you to take advantage.

    Download as the emulator itself DOSbox, and a graphical shell to it -DOG- you can from our website. Download links are at the bottom of the article in the attached files.

    After downloading both programs, install Dosbox first (the installation is standard and does not contain any difficulties). Then we run the DOG shell installer, during installation we specify the path to our DOSbox emulator to the installer program. That's it, now we can easily run old DOS games in Windows XP and Windows Vista using an emulator equipped with a convenient graphical interface.

    Copy the desired game to your hard drive and run the emulator. We find the control panel and the button in it Profiles -> New Profile. Click, enter the name of the game in the field profile name. Next click Select after the EXE filename. We press OK and launch the game by double-clicking on it.

    Sometimes, thanks to the fans, old, beloved DOS games are experiencing a "second birth". Try searching the Internet for a "ported" version of an old game, perhaps someone has already made a version for Windows XP or Windows Vista.

    Running old Windows 95/98 games on Windows XP and Windows Vista

    With games created for the slightly newer Windows 95/98 operating systems, things are a little easier. Developers from Microsoft have provided a special utility for this purpose - Compatibility Mode, and if the old toy completely refuses to run under Windows Xp or Vista, you should enable this mode. For this purpose, we find the executable file of the game and go to its properties (right-click on the file with the option Properties). Go to tab Compatibility. The rest is in the field Run the program in compatibility mode for... check the box next to the desired operating system (Windows 95 or another, depending on which operating system the game was developed for). It remains only to press Apply, close the properties window, and you can run the toy and enjoy!

    A small digression. Sometimes the developers of older games create special patches so that their programs can run on newer operating systems. So, for example, the creators of the game S.T.A.L.K.E.R, which was originally born under Windows XP and did not want to function normally in Windows Vista, did so. After the release of the patch, all problems were resolved. If you managed to find a similar patch for your toy, install the game first, then the patch and play. If the developers have tried, you will be able to enjoy the process.

    Decreased speed in older games

    Another problem for old games on new computers can be too high a speed of the gameplay, because the power of modern computer hardware is several times higher than that for which old games were designed. You will understand what we mean as soon as you experience it yourself. If the game goes too fast, as if in an accelerated mode, you will have to forcibly reduce the power of your computer using special applications. One of the most popular programs for this purpose is CPU Killer, forcibly reducing the frequency of the processor. You can also download it from our website (see links to attached files at the bottom of the article).

    A small guide to working with CPUKiller

    Download CPU Killer and install it. Installation is simple and no different from other programs, just follow the wizard, install and run.

    Novice users are not recommended to change the program settings, just go straight to using it. In the working window of CPUKiller, you will see a graph of the processor and a scale with a slider just below. In order to reduce the frequency, you need to move the slider to the desired percentage and press Start. The processor frequency will be forced down immediately. Minimize the CPUKiller window and play. To turn off just press stop.

    The program can be used without any fear, turned on or off at any convenient time and for any period.

    We hope that you will no longer have problems running old games under Windows XP or Windows Vista, and you will have a great time enjoying rare toys!

    Good afternoon.

    Time inexorably runs forward and, sooner or later, certain programs, games become obsolete. The operating systems in which they worked are also massively beginning to be replaced by newer ones.

    But what about those who want to remember their youth, or do they just need one or another program or game that refuses to work in the newfangled Windows 8?

    In this article, I would like to consider running old programs and games on new computers. Consider several ways, including virtual machines, which allow you to run almost any application!

    So, let's begin…

    1. Game console emulators

    Perhaps the first word in this article should remain with game console emulators (Sega, Dendy, Sony PS). These consoles appeared in the 90s and immediately gained wild popularity. They played from young to old at any time of the year and day!

    By the 2000s, the excitement subsided, computers began to appear and somehow everyone forgot about them. But these console games can also be played on a computer by downloading a special program - emulator. Then download the game and open it in this emulator. Everything is quite simple.

    By the way! The network is full of emulators for other game consoles. The purpose of this little preview for this article was to show that console games can be played on a computer!

    And now let's move from console games to computer games and programs ...

    2. Launch using Windows compatibility tools

    If a program or game refuses to start or behaves unstable, you can try running it in compatibility mode for a specific OS. Fortunately, the developers themselves have built this feature into Windows.

    Is it true, for the entire time of use, this method probably helped me out a couple of times out of several hundred launches of problematic applications! Therefore, it is worth trying it, but you cannot believe in 100% success.

    1) Right-click on the desired executable program file and select properties. By the way, you can also click on the desktop icon (i.e. shortcut). The effect is the same.

    2) Now check the box next to "compatibility mode" and select the OS you want to emulate.

    Then save the settings and try to run the program. There is a chance that it will work.

    3. Launching games and programs in the DOS environment

    Even the oldest programs can be run in a modern OS, however, this will require special programs that emulate the DOS environment.
    About the day of the best DOS emulators in the Windows environment is DOSBox. You can download from office site programs.

    Installing DOSBox

    Installing the program is not difficult. Only I would recommend that during installation, be sure to create an icon (shortcut) of the executable file on the desktop. Check the box next to "Desktop Shortcut".

    Starting games in DOSBox

    Let's take some old game that needs to be run on Windows8. let there be Sid Meier's turn-based strategy Civilization 1.

    If your program requires Windows 98, for example, then you can't do without a virtual machine. Further we will talk about them!

    4. Run old OS on new versions of Windows

    It is possible to run any old program on a new OS only with the help of virtual machines. They are ordinary programs that emulate, as it were, the operation of a real computer. Those. it turns out that you can run an OS in Windows 8, for example, Windows 2000. And already in these running old OSes, run any executable files (programs, games, etc.).

    We will talk about how to do all this in this section of this article.

    4.1. Virtual machine. Installation

    This is a free virtual machine that will allow you to run dozens of operating systems on your new computer, from Windows 95 to Windows 7.

    The only thing is that this type of program is quite demanding on system resources, so if you want to run in Windows 8, Windows 8 OS - you need to have at least 4 GB.

    Works in both 32 and 64 bit systems. Installation takes place in a standard way, personally, I do not touch any checkboxes, everything is by default.

    The only thing I leave a check mark is for the installer to create a shortcut on the desktop to launch the program (Create a shortcut on the desktop).

    In general, after installing VirtualBox, you can proceed to install the OS into it. But more on that below.

    4.2. Setting up a virtual machine

    Before proceeding with the installation of the OS, you need to configure the virtual machine.

    1) After the first launch in VirtualBox, you can click only one button - "create". Actually, we press.

    5) The virtual hard disk that you create in this program is a regular image file. It will be located in the folder that you specify during configuration.

    There are two types of virtual hard disk:

    Dynamic: means that the file will grow in size as the disk fills up;

    Fixed: The size will be set immediately.

    6) On this, as a rule, the configuration of the virtual machine ends. By the way, you should have a button to start the created machine. It will behave as if you turned on the computer without an installed OS.

    4.3. Installing Windows 2000 in a virtual machine

    In this post, we will focus on Windows 2000 as an example. Its installation will not differ much from the installation of Windows Xp, NT, ME.

    To start you need to create or download an installation disk with this OS. By the way, the image is needed in ISO format (in principle, any will do, but with ISO the entire installation procedure will be faster).

    1) Start the virtual machine. Everything is simple here and there should not be any problems.

    2) The second step is to connect our ISO image to the virtual machine. To do this, select device/select optical disk image. If the image has joined, then you should observe such a picture as in the screenshot below.

    3) Now you need to restart the virtual machine. This can be done using the command of the same name. See screenshot below.

    4) If the image is working and you did everything correctly in the previous 3 steps, you will see a welcome screen and the installation of Windows 2000 OS will begin.

    5) After 2-5 min. (on average) copying the installation files, you will be asked to read the license agreement, select a disk for installation, whether to format it, etc. - in general, everything is the same as with a normal Windows installation.

    The only thing. You can not be afraid to make mistakes, because anyway, everything that will happen will happen on a virtual machine, which means that this will not harm your main operating system in any way!

    7) After another reboot, you will already see Windows 2000 installed!

    By the way, you can install games, programs into it, and generally work in it as if it were a computer running Windows 2000.

    4.3. Sharing files with a virtual machine (connecting a hard drive)

    Many users do not experience big problems with installing and setting the basic settings for a virtual machine. But difficulties can begin when you decide to add some file (or vice versa, copy it from the virtual machine disk). Directly, through “edit-copy-paste” the focus will not pass ...


    3) Here you need to select the section " disk management«.

    In the column on the right, click on the control button and select "attach virtual hard disk". Enter the address where it is located and connect the VHD file.

    How to find the VHD file?

    Very simply, by default, during installation, the file will be located at:

    C:\Users\alex\VirtualBox VMs\winme

    where "alex" is your account name.

    Personally, I would not have started to figure it out myself if I had not encountered the fact that the program necessary for the calculations was not so ancient and would not refuse to work in Windows XP. I had to install and configure a virtual machine, then Windows 2000 into it, and calculations were already carried out in it ...

    By the way, how do you run old programs? Or don't use them at all?